![background image](http://html1.mh-extra.com/html/vdo/contisys-obd-v3-0/contisys-obd-v3-0_instruction-manual_3754408079.webp)
FastCheck
77
For BMW X3 (E83), BMW X5 (E53):
• Start the engine but do NOT start driving.
• Hold down the button (shown in the diagram below) for approximately 5 seconds,
or until the RPA Warning Lamp glows yellow.
• The Warning Lamp should stay yellow for 5 seconds to indicate that the Reset has
started.
• Drive off. The Reset will terminate without informing the driver of success. If the
Reset has not been carried out correctly however the RPA Warning Lamp will glow
red and the process must be repeated.
• If the vehicle is stopped while the reset is occurring the reset will be interrupted and
will be resumed when the vehicle is driven again.
Mini
Run-flat Reset (RPA – Tyre Deflation Detection)
The run-flat system monitors the pressure in the four mounted tyres while the vehicle
is being driven.
The system will provide an alert whenever the inflation pressure in a tyre drops
significantly in relation to the pressure of another tyre.
It is necessary to initiate the RPA reset process IMMEDIATELY after every tyre
pressure correction, after a tyre or wheel change or after a trailer has been attached
or detached. The reset MUST be started before driving the vehicle for the first time
after one of the above events.
When a reset is required (due to a pressure change in one of the tyres) the vehicle will
inform the driver by turning on the RPA Warning Lamp, which will glow red, and
sounding an acoustic signal.
OM1345
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......