![background image](http://html1.mh-extra.com/html/vdo/contisys-obd-v3-0/contisys-obd-v3-0_instruction-manual_3754408014.webp)
EOBD Application
12
Identifying compliant vehicles
All petrol engine vehicles manufactured since 2000 should be EOBD compliant. Some
manufacturers began incorporating On-Board Diagnostic systems as early as 1994,
however not all are 100% compliant. All diesel engine vehicles are expected to have
support from 2004. This means that diagnostic information, related to vehicle
emissions, may be extracted from the vehicle via the J1962 diagnostic socket using
the service tool.
The service tool can communicate with any EOBD compliant vehicle using one of the
five diagnostic communication protocols defined in the standard.
These are
• ISO 9141.
• Keyword 2000 (originally a European protocol).
• J1850 PWM (pulse width modulated) protocol used by Ford.
• J1850 VPW (variable pulse width modulated) used by General Motors in USA
designed vehicles.
• CAN (controller area network) currently being legislated for and likely to be a
principle diagnostic communication system in the future. A European protocol.
It is normally possible to tell which is used on a specific vehicle by examining the
diagnostic socket (as below), however the service tool's software will automatically
detect the protocol used on the vehicle to which it is connected.
Although there are different EOBD electrical connection protocols, the command set
is fixed according to the SAE J1979 standard.
•
If the diagnostic socket has a pin in the '7' or '15'
position, then the vehicle uses either the ISO
9141 or Keyword 2000 protocol.
•
If the diagnostic socket has a pin in the '2' or '10'
position, then the vehicle uses one of the SAE
J1850 protocols.
•
If the diagnostic socket has a pin in the '6' or '14'
position, then the vehicle uses the CAN protocol.
CO
N
0019
16
9
1
8
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......