![background image](http://html1.mh-extra.com/html/vdo/contisys-obd-v3-0/contisys-obd-v3-0_instruction-manual_3754408025.webp)
FastCheck
23
FastCheck ABS
Connection
Using the Vehicle Application List on the CD-ROM, identify the required interface cable
for the vehicle system to be tested. Connect the cable to the service tool and secure
the fixing screws.
Note:
If the vehicle being tested is a BMW with a 20 pin connector and an EOBD
(J1962) connector, you must only use the 20 pin connector.
Note:
The Multiplexer cable (A2C59512985) or the CAN converter (A2C59512664)
harness must be used for any diagnostics on the following vehicles:
• BMW 1 series (E81/E87)
• BMW 3 series (E90/E91/E92/E93)
• BMW 5 series (E60/E61)
• BMW 6 series (E63/E64)
• BMW 7 series (E65)
• GM Opel/Vauxhall - Corsa D
• GM Opel/Vauxhall - Signum
• GM Opel/Vauxhall - Vectra C
• GM Opel/Vauxhall - Zafira B
Important information
Mercedes vehicles with Sensotronic Brake Control
•
Ensure that you are fully familiar with the braking system and its operation before
commencing any work.
•
The Sensotronic Brake Control system must be deactivated before carrying out any
maintenance/diagnostic work on the brake system. This can be done from the
service tool menu.
•
Only commence work after the system has been deactivated. Upon deactivation, a
warning message should appear in the instrument panel and maybe accompanied by
an audible warning signal until the system is reactivated. If the warning message does
not occur, assume that the system is not fully deactivated and DO NOT commence
work.
•
Ensure that the Sensotronic Brake Control system is reactivated after the
maintenance work has been completed.
Note:
The manufacturer of the service tool accept no responsibility for any accident or
injury arising from the maintenance of the Sensotronic Brake Control system.
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......