![background image](http://html1.mh-extra.com/html/vdo/contisys-obd-v3-0/contisys-obd-v3-0_instruction-manual_3754408062.webp)
FastCheck
60
Applicable vehicles:
• BMW 1 series (E81/E87)
• BMW 3 series (E90/E91/E92/E93)
• BMW 5 series (E60/E61)
• BMW 6 series (E63/E64)
• BMW 7 series (E65)
• BMW X5 (E70)
• BMW X6 (E71)
Note:
The Multiplexer cable (A2C59512985) or the CAN converter (A2C59512664)
harness must be used.
Battery change:
After fitting a new battery, the battery change function should be run. The battery
change function registers the replacement of a battery with the power management
system. Failure to do so may cause the power management system to operate
incorrectly.
The battery change application determines the required battery capacity and type
from the Car Access System (CAS) module. The replacement battery must be same
capacity and type as displayed.
Note:
Certain vehicles require the use of an Absorbent Glass Mat (AGM) battery.
Applicable vehicles:
• BMW 1 series (E81/E87)
• BMW 3 series (E90/E91/E92/E93)
• BMW 5 series (E60/E61)
• BMW 6 series (E63/E64)
• BMW 7 series (E65)
• BMW X5 (E70)
• BMW X6 (E71)
Note:
The Multiplexer cable (A2C59512985) or the CAN converter (A2C59512664)
harness must be used.
Ford vehicles
Oil Degradation Counter Reset
This option is necessary on vehicles which have Diesel Particulate Filters (DPF) fitted.
This is not necessary on vehicles with petrol or LPG engines or diesel engines if DPF
is not fitted. The counter should only be reset AFTER the oil has been changed.
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......