VDO CONTISYS OBD - V3.0, Инструкция по эксплуатации

Страница: 31 / 144

FastCheck
29
Ford Galaxy (2006 -), Mondeo (2007-), S-Max (2006-), Transit (2006-)
Crash Reset
This option is necessary on vehicles where airbags have been deployed following a
crash. The routine clears the crash flag in the Body Control Module to enable normal
operation after repair of the vehicle and installation of a new airbag.
Land Rover Freelander 2 (2007-)
Restraints Build Mode Entry/Exit
This function can be used to place the Airbag/Restraint system in to build mode, to
enable safe maintenance and repairs to be performed without risk of airbag or
pretensioner detonation. When work has been completed on the system, the Airbag/
Restraints system can be taken out of build mode to enable normal operation.
Crash Reset
This option is necessary on vehicles where airbags have been deployed following a
crash. The routine clears the crash flag in the Body Control Module to enable normal
operation after repair of the vehicle and installation of a new airbag.
Renault vehicles
Select the airbag system then select either 12-pin or 16-pin according to which
connector is fitted to the vehicle under test.Then follow the on screen instructions.
The following functions are available for the airbag system:
1. Read DTCs: Displays all diagnostic trouble codes associated with the airbag
system
2. Clear DTCs: Clears all faults codes from the airbag system.
3. Renault Arm/Disarm for Driver/Passenger Airbag:
The Disarm CM (LOCK) menu option allows the driver airbag to be disabled preventing
accidental deployment while working on the car.
The Arm CM (UNLOCK) menu option causes the driver airbag to become active.
The Disarm Passenger (LOCK) menu option allows the passenger airbag to be
disabled preventing accidental deployment while working on the car.
The Arm Passenger (UNLOCK) menu option causes the passenger airbag to become
active.
Note : Not all vehicles will have a passenger airbag and some vehicles with a
passenger airbag cannot be armed/disarmed using a diagnostic tool (they require a
key to be inserted into the arm/disarm lock located next to the passenger airbag).
Vehicle notification methods for a locked airbag
Method 1 - Fault Code present:
If the user reads airbag diagnostic codes after an airbag has been locked some
models will produce an 'Airbag locked' fault code. After unlocking, this fault code will
not appear, this can be confirmed by reading the diagnostic codes again.