FastCheck
59
A final confirmation of the new data entered is displayed. Press the
key to store
the new information. To cancel the correction and return to the service option list
press the
key.
Note:
The maximum reset value will be the current value of the selected service
option. The service counter will be decremented by 1.
Digital Reset:
Select Digital Reset for vehicles only fitted with a J1962 16 pin connector and do not
support Condition Based Service (CBS).
The service tool will display a message to confirm the reset process was successful.
Applicable vehicles:
• BMW 3 Series (E46)
• BMW 5 Series (E39)
• BMW 7 Series (E38)
• BMW X3 (E83)
• BMW X5 (E53)
• BMW Z4 (E85)
Note:
A manual procedure for service reset is possible for some Digital Reset
applicable vehicles. Refer to Manual Service Reset section for instructions.
Analogue reset:
Select Analogue Reset for vehicles fitted with a 20 pin round diagnostic connector
within the engine bay.
The service tool will display the message “Reset complete” to confirm the reset
process was completed.
Note:
The service tool indicates the completion of the process only. Visual
confirmation via the Service Interval Indicator (SIA) located on the vehicle’s dash panel
is required.
Annual distance:
The average annual distance travelled is required for the calculation of various
Condition Based Service (CBS) functions.
The annual distance is based on the distance travelled after approximately six to eight
weeks from being reset. It is advised to reset the annual distance after any changes
in the driving pattern of the vehicle.
Note:
Incorrect annual distance will affect the CBS intervals.
The value will be set to a default (approximately 30,000 km / 18,640 miles) until the
new value has been calculated.
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......