background image

Introduction

4

FastCheck EPB

• FastCheck EPB (Electronic Parking Brake) allows you to read and clear any fault 

codes stored by the selected system, and in addition can be used during brake 
operation checks or brake pad replacement.

FastCheck SAS

• FastCheck SAS (Steering Angle Sensor) allows you to read and clear any fault 

codes stored by the selected system, and in addition can be used to calibrate the 
steering angle sensor.

FastCheck Service

• FastCheck Service allows you to reset, dependent upon vehicle, the oil service 

interval indicator, service and inspection warning lights.

FastCheck TPMS

• The FastCheck TPMS (Tyre Pressure Monitoring System) function can be used to 

reprogram tyre valves fitted with TPMS valves.

If you are using the service tool for the first time, it is recommended that you read these 
instructions and safety guidelines fully, prior to commencing any testing on a vehicle.

Getting started

Connect the Multiplexer cable (A2C59512985) or the EOBD cable (A2C59512072) to 
the service tool and the vehicle's diagnostic connector. Once connected, the current 
software version number is displayed.

Registration

To ensure that your ContiSys OBD Service-Tool is up to date you must register on the 
website www.contisys-service.com. Select registration and follow the on screen 
instruction. 

 If your language is not available on this website, go to www.contisys-service.com 
where your specific language can be selected.

The software version of the ContiSys OBD is checked and if there is a newer version 
available the tool will be updated. This is a one time service at no cost. Further updates 
will be available by purchasing the ContiSys Update Plus package.

Serial Number

To avoid delay always quote the serial number of the diagnostic unit when requesting 
product support.

Service Hotline

For product support please visit our website: www.contisys-service.com or telephone 
+44 (0) 870 949 3606.

E-mail support

For product support via e-mail please send details of your query to:      
[email protected]

Содержание CONTISYS OBD - V3.0

















































































































































Отзывы: