![background image](http://html1.mh-extra.com/html/vdo/contisys-obd-v3-0/contisys-obd-v3-0_instruction-manual_3754408048.webp)
FastCheck
46
Replace the brake pads
Make a note of the new pad thickness (3-14mm) it is required for the next stage. The
brake pads can now be replaced following the manufacturer’s instructions.
Pad thickness
The brake pad thickness must now be entered by selecting Pad Thickness from the
Replace Pads menu. The current value is displayed on screen. Press the
key to
change value then enter the new value between 3-14mm. Press the
key to test
the new value message will be displayed. Press the
key to move to the store new
value screen. Now press the
key again to store the new value to the control
module.
Close brakes
Select the 'Close Brakes' option from the Replace Pads menu. The brake pistons will
now be moved to their reset position. Wait until the service tool displays the close
brakes now complete message before continuing.
Calibrate brakes
Select the 'Calibrate Brakes' option from the Replace Pads menu. The brake pistons
will now be moved in and out to calibrate their position. Wait until the service tool
displays the calibrate brakes now complete message before continuing.
Brakes service sequence (only)
The EPB system must be deactivated and completely released and the ignition must
be on then follow the sequence described below.
Note:
The sequence must be performed in the correct order else the braking system
maybe left in a non-operational state.
Release brakes
Select the 'Release Brakes' option from the Service Brakes menu. The brake pistons
will now be moved to their released position. Wait until the service tool displays the
release brakes now complete message before continuing.
Service the brakes
The brakes can now be serviced following the manufacturer’s instructions.
Close brakes
Select the 'Close Brakes' option from the Service Brakes menu. The brake pistons will
now be moved to their reset position. Wait until the service tool displays the close
brakes now complete message before continuing.
Calibrate brakes
Select the 'Calibrate Brakes' option from the Service Brakes menu. The brake pistons
will now be moved in and out to calibrate their position. Wait until the service tool
displays the calibrate brakes now complete message before continuing.
Содержание CONTISYS OBD - V3.0
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Страница 2: ......
Страница 143: ......
Страница 144: ......