K5/K5N Vacuum Packaging Machine
Description of the machine
2002-04-25
Art. no. 519.339 DE
Page 1 1/55
3 Description of the machine
3.1
Principle of how it works
The vacuum bags are sealed in the vacuum chamber by welding the opening of the bag under a
vacuum or (in the case of K5N machines) in an atmosphere which is enriched with inert gas .
3.1.1
Structure of the machine
The machine can be divided into the following
modules:
Vacuum chamber
The lid of the vacuum chamber (1) lifts up
or down. The vacuum chamber contains
the welding bars (6), the welding cap
passes (7) and, where required, the filling
plates (2).
Fig. 3/1
Bottom part
The bottom part (4) of the machine contains the vacuum pump. There are detachable covers
(3) on the side and back of the bottom part. The machine stands on 4 casters. The front two
casters (5) lock.
Control panel operation
The controls and the control panel (9) are integrated onto the front of the bottom part. The
control unit is accessed by opening the cabinet door (10). The main switch (8) is located to
the side of the control panel (8).
3.1.2
Packaging cycle
Brief description of a packaging cycle :
1.
Open the vacuum chamber.
2.
Insert the filled vacuum bags.
3.
Close the lid of the vacuum chamber.
4.
Start the program: The vacuum is created
and (in the K5N machine) inert gas is fed in.
5.
Weld the bags and trim the excess material off the bags.
6.
Open the vacuum chamber.
7.
Remove the packaged products.
8.
Remove the bag film offcuts.
The machine must be manned by an operator in order to perform the procedures and operate the
machine.
Содержание K5
Страница 36: ...K5 K5N Vacuum Packaging Machine Operation 2002 04 25 Art no 519 339 DE Page 36 55 9 5 7 Program table Fig 9 12...
Страница 52: ...K5 K5N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 339 DE Page 52 55 17 2 Circuit diagrams...
Страница 53: ...K5 K5N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 339 DE Page 53 55...
