K5/K5N Vacuum Packaging Machine
Operation
2002-04-25
Art. no. 519.339 DE
Page 3 3/55
9.5.3
Programming
Various basic settings for a program can be defined in the service program. Before you start to program
a packaging program, we recommend that you check and, if necessary, change the basic settings
defined in the service program. In order to do this, read the section on the ”Service program“.
9.5.3.1 Selecting a program number
§
Select the program number in order to compile a new program or to edit an existing program.
A
Arrow buttons to select the program number.
B
The selected program number is shown on LED display 2. It remains on the display until a new
program number is entered.
Fig. 9/10
9.5.3.2 Compiling or changing a program
Values can be assigned to any program function. The values entered affect the program whose number
is shown on LED display 2.
§
Select the appropriate program functions and enter the requested values.
C
Program functions
D
Arrow buttons for entering or changing the values for the program function currently selected.
E
The values set with the arrow buttons are shown on LED display 1.
Fig. 9/11
The values set are saved in the controller. Once the data has been entered, the controller can be
returned to the basic setting by pressing STOP or, if the vacuum pump is running, the program can be
started immediately by closing the vacuum chamber.
Data in protected programs cannot be changed.
Содержание K5
Страница 36: ...K5 K5N Vacuum Packaging Machine Operation 2002 04 25 Art no 519 339 DE Page 36 55 9 5 7 Program table Fig 9 12...
Страница 52: ...K5 K5N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 339 DE Page 52 55 17 2 Circuit diagrams...
Страница 53: ...K5 K5N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 339 DE Page 53 55...
