vc999 K5, Руководство по эксплуатации

Страница: 41 / 55

K5/K5N Vacuum Packaging Machine
Maintenance
2002-04-25
Art. no. 519.339 DE Page 4 1/55
13 Maintenance
Service the machine regularly in order to ensure that it works properly. Maintenance includes all work
which serves to keep the vacuum packaging machine in good work ing order, including the following:
§
cleaning
§
checks
§
maintenance work
WARNING
The machine MUST be switched off before installation, maintenance and repair work is carried
out on it. Before this work gets under way, switch off the main switch and put on a padlock to
prevent the machine being switched on inadvertently. Keep the key out of the reach of other
people!
WARNING
After switching off the machine, wait as long as necessary for the machine to cool down. There
is a danger that you may get burned on the vacuum pump and welding bars!
13.1 Cleaning
13.1.1 Detergent
Aggregates Detergent
Vacuum chamber
Welding bars and cap passes
Filling plates
Vacuum chamber lid
Switchge ar cabinet door
Lid seal Do not use anything that will scour or scratch!
Use standard detergents which conform to hygiene
regulations.
Housing and panelling parts Standard chromium steel detergents
13.1.2 Cleaning interval
Daily
§
Remove and clean the filling plates.
§
Clean the vacuum chamber. No dirt or liquids may get into the suction nozzles!
§
Clean the welding bars and welding cap passes. Do not use any sharp objects to remove welding
residue!
§
Clean the lid seal.
§
Clean the outer surfaces of the machine and the control panel with a damp sponge or with a cloth
which has been wet with water.
13.2 Checks
Faults can often be uncovered during routine checks before they lead to downtime during production.
Perform the following checks: