TECHNISCHE ANGABEN
41/94
CN929-7015M002
Konfigurationsbefehle
Folgende Befehle werden nur im Konfigurationsmodus freigeben. Zu diesem Modus bekommt man über den Befehl
Serieneigenschaften
Zugriff, indem man dabei die Konfiguration freigibt; zum Beenden das System rückstellen.
Befehl
Beschreibung
Modus
Kanäle
Format
Mögliche Werte
serial config
Schreibvorgang
wird
freigeben Zugang
Parameterkonfiguration
Lesen
Schreiben
Kein Kanal
Status
30h Normalmodus
31h Serienkonfigurations-
modus
serial property
Serienprotokoll-
eigenschaften
Lesen
Schreiben
Kein Kanal
bitField
Siehe Tabelle
Protokolleigenschaften
short circuit
volt
Kurzschluss Spannung
Lesen
Schreiben
Kein Kanal
Integer
[1, 7000]
short circuit
current
Kurzschluss Strom
Lesen
Schreiben
Kein Kanal
Integer (mA)
[1, 400]
short circuit
time
Kurzschluss
ansprechen Zeit
Lesen
Schreiben
Kein Kanal
Integer (s)
[10, 6000] Arbeitsgang 10
ausgedrückt in ms x10
protect
time
Schutz ansprechen Zeit Lesen
Schreiben
Kein Kanal
Integer (s)
[10, 6000] Arbeitsgang 10
ausgedrückt in ms x10
protect
delay
Schutz bei Leistung ein
Funktion freigeben
Zeitverzug
Lesen
Schreiben
Kein Kanal
Integer
[10, 6000] Arbeitsgang 10
ausgedrückt in ms x10
prDeita1
f(I, V) = konstante
Druckberechnung
Lesen
Schreiben
Kein Kanal
Exp.
[0.0, 10.0]
prDeita2
f(I, V) = konstante
Druckberechnung
Lesen
Schreiben
Kein Kanal
Exp.
[0.0, 10.0]
P100nA
Druckwert bei
5000V mit I=100nA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[1.0E-15,
min(1.1E-9, P1µA)]
P1µA
Druckwert bei
5000V mit I=1µA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[P100nA, P10µA] beim
Lesen an Ersatzteilpumpe
P10µA
Druckwert bei
5000V mit I=10µA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[max(1.2E-9, P10µA),
min(7.4E-8, P100µA]
P100µA
Druckwert bei
5000V mit I=100µA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[P10µA, P1mA] beim
Lesen an Ersatzteilpumpe
P1mA
Druckwert bei
5000V mit I=1mA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[P100µA, P10mA] beim
Lesen an Ersatzteilpumpe
P10mA
Druckwert bei
5000V mit I=10mA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[max(7.5E-8, P1mA),
min(7.4E-5, P100mA]
P100mA
Druckwert bei
5000V mit I=100mA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[P10mA, P400mA] beim
Lesen an Ersatzteilpumpe
P400mA
Druckwert bei
5000V mit I=400mA
Lesen
Schreiben
HV1, HV2
Exp. (Torr)
[max(7.5E-5, P100mA),
1.0E2]
reinitialize
eeprom
Voreinstellungen wieder
in EEPROM hochfahren
Schreiben
1
Kein Kanal
Status
1 Voreinstellungen wieder
in EEPROM hochfahren
setpoint
histeresys %
Histeresys Perozentsatz
der Einstellung Fern
E/A Wert
Lesen
Schreiben
Kein Kanal
Integer (%)
[0,100] Arbeitsgang 1
1
E-Net Dual-Controller antwortet nicht auf diesen Befehl und auf dem Bildschirm erscheint SYSTEM ERR 5, abschalten
und wieder einschalten, um den Fehler rückzustellen.