![background image](http://html1.mh-extra.com/html/varian/929-7015m002/929-7015m002_instruction-manual_3514428088.webp)
TECHNICAL INFORMATION
81/94
CN929-7015M002
Configuration Commands
The following commands are enabled in the configuration mode only. This mode is accessed through the
serial property
command, enabling the configuration; reset the system to exit.
Command
Description
Mode
Channels
Format
Possible Values
serial config
Enables write access to
the configuration
parameters
Read
Write
No channel
Status
30h normal mode
31h serial configuration
mode
serial property
Serial protocol
characteristics
Read
Write
No channel
bitField
See the protocol
properties table
short circuit
volt
Short circuit voltage
Read
Write
No channel
Integer
[1, 7000]
short circuit
current
Short circuit current
Read
Write
No channel
Integer (mA)
[1, 400]
short circuit
time
Short circuit intervention
time
Read
Write
No channel
Integer (s)
[10, 6000] step 10
expressed in ms x10
protect
time
Protect intervention time Read
Write
No channel
Integer (s)
[10, 6000] step 10
expressed in ms x10
protect
delay
Protect at power on
function enable delay
time
Read
Write
No channel
Integer
[10, 6000] step 10
expressed in ms x10
prDeita1
f(I, V) = Pressure
calculation constant
Read
Write
No channel
Exp.
[0.0, 10.0]
prDeita2
f(I, V) = Pressure
calculation constant
Read
Write
No channel
Exp.
[0.0, 10.0]
P100nA
Pressure value at
5000V with I=100nA
Read
Write
HV1, HV2
Exp. (Torr)
[1.0E-15,
min(1.1E-9, P1µA)]
P1µA
Pressure value at
5000V with I=1µA
Read
Write
HV1, HV2
Exp. (Torr)
[P100nA, P10µA] in read
on SPARE pump
P10µA
Pressure value at
5000V with I=10µA
Read
Write
HV1, HV2
Exp. (Torr)
[max(1.2E-9, P10µA),
min(7.4E-8, P100µA]
P100µA
Pressure value at
5000V with I=100µA
Read
Write
HV1, HV2
Exp. (Torr)
[P10µA, P1mA] in read on
SPARE pump
P1mA
Pressure value at
5000V with I=1mA
Read
Write
HV1, HV2
Exp. (Torr)
[P100µA, P10mA] in read
on SPARE pump
P10mA
Pressure value at
5000V with I=10mA
Read
Write
HV1, HV2
Exp. (Torr)
[max(7.5E-8, P1mA),
min(7.4E-5, P100mA]
P100mA
Pressure value at
5000V with I=100mA
Read
Write
HV1, HV2
Exp. (Torr)
[P10mA, P400mA] in read
on SPARE pump
P400mA
Pressure value at
5000V with I=400mA
Read
Write
HV1, HV2
Exp. (Torr)
[max(7.5E-5, P100mA),
1.0E2]
reinitialize
eeprom
Reloads the defaults in
EEPROM
Write
1
No channel
Status
1 reloads the defaults in
EEPROM
setpoint
histeresys %
Histeresys percentage
range of the setPoint
Remote I/O value
Read
Write
No channel
Integer (%)
[0,100] step 1
1
E-Net Dual Controller doesn't reply to this command and the display will show SYSTEM ERR 5, turn off and on the
power to reset the error.