TECHNISCHE ANGABEN
22/94
CN929-7015M002
Fernanschluss E/A Verbindereingangssignal
Stift
Signal
Max. Werte
Beschreibung
11 positive
30 negative
External interlock
Digital input
8 bis 30 VDC/VAC 15 mA max
Anschluss geschlossen: Der HV-
Ausgang des zugehörigen HV-Kanals
ist freigegeben.
Anschluss offen: Der HV-Ausgang des
zugehörigen HV-Kanals ist nicht
freigegeben.
12 positive
31 negative
Confirm HV ON
Digital input
8 bis 30 VDC/VAC 15 mA max
Aktiv im positivem Bereich. Wenn ein
positiver Bereich erkannt wird, wird der
HV-Ausgang eingeschaltet, wenn beide
Anschlüsse und der Ausgang ON/OFF
geschlossen sind.
13 positive
32 negative
Output ON/OFF
Digital input
8 bis 30 VDC/VAC 15 mA max
Ausgang ON/OFF offen: Die HV-
Ausgang des zugehörigen Kanals ist
ausgeschaltet.
Ausgang ON/OFF geschlossen: Der
HV-Ausgang des zugehörigen Kanals
ist freigegeben.
14 positive
33 negative
Start/Protect mode
Digital input
8 bis 30 VDC/VAC 15 mA max
Geschlossen: Schutz angewählt
Offen: Start angewählt
15 positive
34 negative
Communication select
Digital input
8 bis 30 VDC/VAC 15 mA max
Aktiv im positivem Bereich. Wenn ein
positiver Bereich erkannt wird, werden
die DUAL-Schalter abwechselnd vom
Serienmeldungsbetrieb auf Fernbetrieb
E/A und umgekehrt geschaltet.
16 positive
35 negative
StepV FixedV mode
Digital input
8 bis 30 VDC/VAC 15 mA max
Geschlossen: STEP V
Offen: Fixed V
MERKE
De externe Anschluss arbeitet unabhängig vom
Betriebsmodus (Lokale, Fernmeldung, Fernschalter
I/O). In jedem Betriebsmodus muss der Anschluss bis
zur Pumpeninbetriebnahme geschlossen sein.
MERKE
Die Eingangssignale sind nur aktiv, wenn der
Betriebsmodus auf Fern steht. Die Eingangssignale
sind in allen Betriebsmodi aktiv.