INSTRUCTIONS FOR USE
14/94
CN929-7015M002
MESSAGE
DESCRIPTION
CORRECTIVE ACTION
HV(X) ERROR
OVER VOLT/CURR
Incorrect voltage and current values were
detected on the H.V. output.
This error indicates a malfunction of the H.V.
control circuit.
Repeat the Dual power on procedure; if the
problem persists, contact Varian for repair or
exchange.
MESSAGE
DESCRIPTION
CORRECTIVE ACTION
HV(X) ERROR
ZERO MEAS
The E-Net Dual Controller’s microprocessor has
detected that both voltage and current were
missing from the H.V. output that should have
been active.
Repeat the Dual power on procedure; if the
problem persists, contact Varian for repair or
exchange.
SYSTEM ERRORS
SYSTEM ERROR
ER 1 ÷ 10
For Varian Service diagnostic purpose only. Switch OFF and ON again the power to the DUAL system, if
the problem persists, contact Varian for repair or exchange