VALTIR QuadGuard HS, Инструкция по сборке

Страница: 31 / 60

Valtir.com 30 Revision D November 2022
5) Attach Quad-Beam Diaphragms
Orient a Quad-Beam Diaphragm so that the front face of the Quad-Beam shape faces
toward the nose of the system (Figure 24). Slide one Diaphragm all the way to the Backup
to ensure the system is able to collapse properly during impact. Once this has been
verified then slide the Diaphragm forward to approximately 36” [915 mm] in front of the
Backup. Orient and slide all other Quad-Beam Diaphragms onto Monorail and position
each approximately as shown in Figure 26.
6) Attach HS Diaphragms
Orient an HS Diaphragm so that the square tube faces toward the Nose of the system
(Figure 25). One at a time, slide the HS Diaphragms onto the Monorail and position each
approximately 36” [915 mm] forward of the previous diaphragm (Figure 26).
Figure 25
HS Diaphragm Orientation
(Diaphragms 1, 2, and 3)
Figure 24
Quad-Beam™ Diaphragm Orientation
(Diaphragms 4 through 9)
Figure 26
Diaphragm spacing
915 mm [36”] 915 mm [36”]
TYPICAL
QUAD-BEAM™ DIAPHRAGMS (6) HS DIAPHRAGMS (3)
TOWARD NOSE
FRONT BACK
QUAD-BEAM