2-9
ValcoMelton
Section 2 - Safety Information
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Do not
Do not
Do not
Do not
Do not use bindings, wire ties, or unapproved
fasteners around the hoses.
Do
Do
Do
Do
Do use approved wrapping (P/N KAP0434),
making sure the wrapping is slightly snug but
not tight.
Do not
Do not
Do not
Do not
Do not place hoses close together.
Do
Do
Do
Do
Do allow at least 2 inches (5.1 cm)
between hoses for proper ventilation.
Do not
Do not
Do not
Do not
Do not bend hoses sharply. Do not
Do not
Do not
Do not
Do not allow
kinks or indentations in the hoses.
Do
Do
Do
Do
Do use a minimum bend radius of 10
inches for a 20-inch diameter coil hose.
Do not
Do not
Do not
Do not
Do not use unapproved hooks to hang hoses.
Do not
Do not
Do not
Do not
Do not wrap hoses over or around objects.
Do
Do
Do
Do
Do use a hose hanging kit (P/N 781xx827).
Do not
Do not
Do not
Do not
Do not use the “one handed/one wrench”
technique to attach or remove hoses. Do
Do
Do
Do
Do
not
not
not
not
not wrench on any surface other than the
large hexagon swivel nuts.
Do
Do
Do
Do
Do use two hands and two wrenches to
tighten or loosen connections on hoses.
Do
Do
Do
Do
Do wrench only on large hexagon swivel
nuts.
Hose Safety
Information
