5-17
Valco Cincinnati, Inc.
Section 5 - Operation
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Pressure Setup - Continued
Name
Use
Pressure Transducer
Configuration Button
Press for Pressure Transducer Setup Dialog to adjust the
configuration of the transducer.
Pressure Curve
Displays a visual representation of the pressure curve for
the transducer.
Current Valve Pressure
Displays the current valve pressure.
Decrease Current Valve
Pressure
Press to decrease the current valve pressure.
Increase Current Valve
Pressure
Press to increase the current valve pressure.
Machine Stop (Idle) Pressure
When the machine stops, the valve will automatically be set
to this pressure. Use to keep adhesive ready to apply but
not dispensing during machine stops. Press for numerical
keypad to edit.
Pressure Transducer
Setup Dialog
Pressing a Pressure Transducer Configuration Button on the Pressure Menu
Screen opens the Pressure Transducer Setup Dialog for the selected
pressure transducer.
In this dialog, the number of points on the pressure curve can be adjusted.
The speed and pressure for each point on the pressure curve, as well as the
idle pressure, can be edited. Press the edit fields that display values in green
to open the keypad.
Confirmation
Button
Figure 5-21. Pressure Transducer Setup Dialog
Pressure
Transducer
Number
Machine
Stop (Idle)
Pressure
Number of
points/
pressure
curve
Speed for each point
on the curve
Pressure for each
point on the curve
Cancel Button
Pressure Curve
Current
Pressure
