5-20
Valco Cincinnati, Inc.
Section 5 - Operation
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Encoder Setup - Continued
Name
Use
Repeat Length Value
Length of one revolution of the measuring wheel.
Encoder Pulse Value
Number of pulses per one revolution of the measuring wheel.
An encoder must be installed in order for the control to determine the
speed of the parent machine. You can use either a wheel-driven VDD
encoder and a measuring wheel or a hollow shaft encoder. For optimal
results, use a VDD-1000 encoder for one of the following resolutions: a 10
inch wheel = 100 pulses/inch; a 250mm wheel = 4 pulses/mm.
Confirmation Button
Press to enter the new settings. (No settings or values are
entered until this is pressed.)
Cancel Button
Cancel the new settings and return to the previous settings.
(Use before pressing the Confirmation Button.)
