4-10
Valco Cincinnati, Inc.
Section 4 - Setup
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Gate Sensor
OT-120 Setup - New Application
Checking for
Preconfiguration
1.
Power on the terminal.
a.
If the screen (Figure 4-9) shows your application, skip
to “Step 6.”
b.
If a different application is needed, click the locked
Configuration Button, located in the bottom, left-hand
corner of the terminal screen. A numeric keypad will
appear (Figure 4-11).
Figure 4-9. OT-120 Application Select
Figure 4-10. OT-120 Flexoseal Pro 2 Example
The Screen may appear different,
depending on your application
Scroll List of Available Options
The Screen should start up with this
image unless it has been
preconfigured.
This manual is specific to the
FlexosealPro.
