4-14
Valco Cincinnati, Inc.
Section 4 - Setup
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
OT Configuration Setup -
Continued
4.
Make sure “Use factory default configuration” is checked, and
then click the Confirmation Button.
Figure 4-17. Restore System Settings
5.
From the configuration menu (Figure 4-18), select the appropriate
configuration.
Figure 4-18. Configurations Menu
6.
After selecting the configuration, and clicking the Confirmation
Button, the terminal will shut down. On boot-up, the terminal should
automatically start up in the correct application.
This is the preferred method for
setting the overall configurations.
An older method is expalined
below, for completeness, for setting
Machine Communication.
Confirmation
