13-2
Valco Cincinnati, Inc.
Section 13 - Operation
MC032 - MCP-25 Control
5.
Enter the repeat factor:
The repeat factor is the number of
identical, consecutive glue patterns to
be applied (based on the first glue
pattern).
a.
Enter “1” for one pattern or multiple patterns of
different lengths.
b.
Enter “2,” “3,” “4,” etc. for multiple, identical,
consecutive patterns.
6.
Enter the pattern-delay information:
a.
Use the arrow buttons to move the cursor down to
the first delay field.
b.
Enter a value for delay 1 (the distance from the
leading edge of the product to the start point of the
first glue pattern).
The delay value must be entered in
either millimeters or 1/100", depending
on the configuration of the unit.
c.
Press the ENTER button.
7.
Enter the pattern-length information:
a.
Using the right arrow button, move the cursor one
field to the right.
b.
Enter a pattern length for pattern 1. (The pattern
length must be entered in either millimeters or 1/100"
depending on which unit of measure was selected in
the setup menu.)
c.
Press the ENTER button.
8.
Enter information for additional valves:
a.
Press F3 (NEXT) to access the glue-pattern menu
for the next valve (valve 2). Program additional
valves in the same manner as described for valve 1.
b.
You may use the “COPY” button (F2) to copy valve 1
glue pattern information to another valve.
Creating a New Job - Continued
