9-4
Valco Cincinnati, Inc.
Section 9 - Glue-Pressure-Edit Menu
MC032 - MCP-25 Control
Examples of
Glue-Pressure
Values
C o r re s p o n d in g G lu e P re s s u re – p s i ( b a r)
In p u t in %
P re s s u r e T ra n s d u c e r
A i r-P re s s u re O u tp u t –
p s i (b a r )
1 : 1
2 :1
3 :1
5 :1
7 : 1
1 0 : 1
1 0 0 7 2
(6 )
7 2
(6 )
1 6 0
(1 2 )
2 4 6
(1 8 )
4 2 0
( 3 0 )
5 9 4
(4 2 )
7 5 5 1
(4 .5 )
5 1
(4 .5 )
1 1 6
( 9 )
1 8 1
(1 3 .5 )
3 1 2
(2 2 .5 )
4 4 2
(3 1 .5 )
6 8 3
(4 5 )
5 0
2 9 (3 )
2 9 (3 )
7 2 (6 )
1 1 6
(9 )
2 0 3
( 1 5 )
2 9 0
(2 1 )
4 2 0
(3 0 )
2 5
7 (1 . 5 )
7 (1 .5 )
2 9 (3 )
5 1
(4 .5 )
9 4
(7 . 5 )
1 3 8
(1 0 .5 )
2 0 3
(1 5 )
5
0 (0 . 3 )
0 (0 .3 )
0
(0 .6 )
0 (0 .9 )
7 (1 .5 )
1 6
(2 .1 )
2 9 (3 )
CAUTION!
CAUTION!
CAUTION!
CAUTION!
CAUTION!
Note the maximum allowable operation pressure of the
pressure container.
To enter the glue-pressure data manually, follow these steps:
1.
1.
1.
1.
1.
Enter the necessary glue pressure (glue amount) at the
Enter the necessary glue pressure (glue amount) at the
Enter the necessary glue pressure (glue amount) at the
Enter the necessary glue pressure (glue amount) at the
Enter the necessary glue pressure (glue amount) at the
minimum speed of the parent machine:
minimum speed of the parent machine:
minimum speed of the parent machine:
minimum speed of the parent machine:
minimum speed of the parent machine:
a.
Operate the parent machine at the slowest
(minimum) production speed.
b.
Read the speed setting in the display of the MCP-25.
The speed can be seen in the diagnostic menu.
If no values are entered in the glue
pressure curve, the control provides
values for the minimum and maximum
speed of the parent machine. You may
change these sample values.
c.
Move the cursor to the field on the right of “V” and
below “min” in the display.
d.
Enter the minimum speed of the parent machine in
this field.
Entering the
Glue-Pressure
Data Manually
