7-3
Valco Cincinnati, Inc.
Section 7 - Job Management Menu
MC032 - MCP-25 Control
F1
Saving a Job
To save the current job to memory, follow these steps:
1.
Press F1 (SAVE).
If the job has already been named, the
job name displays. If the current job has
not yet been named, the “To save this
job, enter a job name:” message
displays.
2.
Enter a job name if the job has not yet been named.
The job name can consist of any
combination of alphanumeric
characters. You use the scroll buttons
to enter letters and the “-” sign and the
numeric keypad to enter numbers.
Pressing the right arrow key advances
you to the next character place;
pressing the left arrow key takes you
back to the previous character.
3.
Press F2 (YES) to answer yes to the “Save job?” message.
Step 1—Job-Management Menu
To save a current job that was loaded from memory and then modified:
1.
Press F1 (SAVE). The “Data have been changed” message
displays.
2.
Either press F2 (YES) to replace the previous job (all data that
was saved under the old job will be overwritten)
or
or
or
or
or press F3
(NAME?) to save the current job under a new name (this allows
the old job to remain in memory).
