background image

 

GENERAL

6

1.5

Customer service

1.6

Warranty

1.6.1

Warranty terms and conditions

The information in this document has been compiled in consideration of applicable standards and regulations,
accepted rules of engineering, as well as our accumulated years of knowledge and experience.

The warranty period and the scope of the warranty are defined in the terms of the contract and the general
terms and conditions of delivery of Vahle GmbH & Co. KG.

Our general terms of warranty and delivery are published on our website. 

www.vahle.de

WARNING!

No liability in case of unauthorized changes, modifications, or accessories!

Changes or modifications to the delivered product require the permission of the man-
ufacturer. Genuine spare parts and manufacturer-approved accessories provide safe-
ty. The use of non-approved parts voids any liability of the manufacturer.

Always consult the manufacturer first!

The warranty immediately expires if one or several of the following situations arise(s):

• If the product is modified without permission from Vahle.
• If the operator independently performs repairs during the warranty period or has repairs performed by

third parties.

• If the product has been handled or maintained inappropriately.
• If parts are used that are not original parts approved by Vahle.
• If the information in this documentation is not observed.

Paul Vahle GmbH & Co. KG

Westicker Str. 52
Tel: +49 (0) 2307 704-0
Fax: +49(0) 2307 704-4 44
59174 Kamen, GERMANY
Email: [email protected]
Web: http://www.vahle.de
Country of origin: Germany

Содержание VCL Series

































































































Отзывы: