Vahle VCL Series страница 90 Скачать руководство пользователя

Страница: 90 / 96

TRANSPORT AND STORAGE

8.1

Safety instructions for transport and storage

NOTICE!

Damage due to improper transport or storage. Improper transport or storage may
cause significant property damage!

►

Storage temperature: 0 °C to +45 °C

►

Storage location: Indoors, dry, no exposure to chemicals.

►

Do not expose to direct sunlight.

►

Exercise caution and observe the symbols on the packaging while unloading the
pieces at delivery or during transport on the facilities.

8.2

Transport inspection

Check the delivery for completeness and transport damage upon receipt!

If any external damage is found:

• Refuse delivery or accept delivery only conditionally.
• Note the scope of the damage in the transport documents or on the carrier's delivery note.

NOTICE!

The delivery may be damaged during transport!

Report all defects as soon as they are found. Claims for damages can only be made
during the applicable period.

►

Document and report the defects found.

Conductor rail

• Transport and storage in wooden crates.
• Transport by truck

NOTICE!

Incorrect unpacking can lead to damage!

Improper unpacking may lead to property damage and personal injury.

►

Only handle sections using lifting equipment which allows full-surface support or
at least a three-point support, for example by using a lifting traverse.

Содержание VCL Series

































































































Результаты поиска

Содержание VCL Series

Отзывы:

Похожие инструкции для VCL Series

Бренды по названию

Популярные бренды

Vahle VCL Series, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание VCL Series

Отзывы:

Похожие инструкции для VCL Series

Бренды по названию

Популярные бренды