Vacon 20 CP, Инструкция по установке, техническому обслуживанию и ремонту

Страница: 22 / 112

vacon • 19 Receipt of delivery
2
2.3 Unpacking and lifting the AC drive
The weights of the AC drives vary according to frame size. Note the weights of each individual
frame size in Table 4 below.
Table 4. Frame weights.
VACON
®
20 Cold Plate drives have undergone scrupulous tests and quality checks at the fac-
tory before they are delivered to the customer. However, after unpacking the product, check
that no signs of transport damage are to be found on the product and that the delivery is com-
plete.
Should the drive have been damaged during shipping, please contact the cargo insurance com-
pany or the carrier in the first instance.
2.4 Accessories
After lifting the converter out, check that the delivery is complete and the following accessories
are included in the plastic bag:
Figure 8. STO connector.
Frame Weight [kg] Weight [lb]
MS2 2 4.4
MS3 3 6.6
Item Quantity Purpose
STO terminal connector
*
*.
Included only in the MS2 three-phase version and MS3.
1
Six pin black connector (see
Figure 8) to use STO function
M3.5 x 8 TapTite screw 4 Screws for control cable clamps
M1-3 Cable clamp 2 Clamping control cables