Vacon 20 CP, Инструкция по установке, техническому обслуживанию и ремонту

Страница: 91 / 112

Options vacon • 88
Service support: find your nearest Vacon service center at www.vacon.com
8
101 Modbus buffer overflow
Check Modbus specifications for
time-out.
Check cable length.
Reduce ambient noise.
Check baudrate.
104 Option board channel full
Check contacts in option board slot.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
105
Option board memory allocation
fail
Check contacts in option board slot.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
106 Option board Object queue full
Check contacts in option board slot.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
8
System Fault 107 Option board HMI queue full
Check contacts in option board slot.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
108 Option board SPI queue full
Check contacts in option board slot.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
111 Parameter copy error
Check if parameter set is compatible
with drive.
Do not remove Keypad until copy is
finished.
113
Frequency detective timer over-
flow
Check keypad contacts.
Try to reduce ambient noise.
Should the fault re-occur, contact the
distributor near to you.
114 PC control time out fault
Do not close Vacon Live when PC
control is active.
Check PC-Drive cable.
Try to reduce ambient noise.
115 DeviceProperty data format
Reset the fault and restart.
Should the fault re-occur, contact the
distributor near to you.
120 Task stack overflow
Reset the fault and restart.
Should the fault re-occur, contact the
distributor near to you.
Fault
code
Fault name Subcode Possible cause Remedy
Table 39. Fault codes and descriptions.