UTT Technologies
Chapter 7 Advanced
http://www.uttglobal.com
Page 89
Interface:
It specifies an outbound interface through which the packets are forwarded
to the next hop gateway or router. The available options are LAN, WAN1, APClient
and 3G.
Save:
Click to save your changes.
Cancel:
Click to revert to the last saved settings.
Back:
Click to go back to the
Static Route List
.
6.3.4 How to Add Static Routes
To add one or more static routes, follow these steps:
Step 1
Go to the
Advanced > Static Route
page, and click the
Add
button to go to the
setup page.
Step 2
Specify the
Name
for the static route, and leave the
Enable
check box
checked.
Step 3
Specify the
Destination IP
,
Subnet Mask
, and
Gateway IP Address
.
Step 4
Specify the
Priority
as required.
Step 5
Select an outbound interface from the
Interface
drop-down list as required.
For example, if you want to add a static route for the network 192.168.1.0/24 pointing to
192.168.1.254, please choose
LAN
as the outbound interface. The following figure shows
the detailed settings.
Figure 6-20 Static Route Settings - Example
Step 6
Click the
Save
button to save the settings. You can view the static route in the
