UTT Technologies
Chapter 7 Advanced
http://www.uttglobal.com
Page 85
6.2.6.2 How to Configure an Internet Whitelist
To configure an Internet whitelist, follow these steps:
Step 1
Go to the
Advanced > IP/MAC Binding
page, and click the
Add
button to go to
the
IP/MAC Binding Settings
page.
Step 2
Specify the legal users by creating the IP/MAC bindings: Add these users’ IP
and MAC address pairs into the
IP/MAC Binding List
. By default, an IP/MAC
binding’s
Allow
check box is checked, which means that the user matching the
IP/MAC binding can access the Gigabit Router and Internet, so please leave
the default value. Refer to
Section 7.2.4 IP/MAC Binding Settings
for detailed
information.
Step 3
Clear the
Allow Undefined LAN PCs
check box to block all the undefined
users from accessing the Gigabit Router and Internet.
For example, if you want to allow a local computer with IP address 192.168.1.2 and MAC
address 0021859b4544 to access the Gigabit Router and Internet, you can add its
IP/MAC address pair into the
IP/MAC Binding List
, see Figure 6-15. The binding’s
Allow
check box is checked by default, so please leave the default value.
Figure 6-15 IP/MAC Binding List - Example 1
6.2.6.3 How to Configure an Internet Blacklist
To configure an Internet blacklist, follow these steps:
Step 1
Go to the
Advanced > IP/MAC Binding
page, and click the
Add
button to go to
the
IP/MAC Binding Settings
page.
Step 2
Specify the illegal users by creating the IP/MAC bindings. There are two
methods (Refer to
Section 7.2.4 IP/MAC Binding Settings
for detailed
information.):
