http://www.uttglobal.com
Page 17
UTT Technologies
Chapter 4 Start Menu
/
www.argo-contar.com
3.2 Logging in to the Gigabit Router
This section describes how to login to the Gigabit Router.
No matter what operating system is installed on your computer, such as, MS Windows,
Macintosh, UNIX, or Linux, and so on, you can login to and configure the Gigabit Router
through the Web browser (for example, Internet Explorer).
To login to the Gigabit Router, do the following: Open a Web browser, enter the Gigabit
Router’s LAN interface IP address (the default is
192.168.1.1
) in the address bar, and
then press
<Enter>
key, see Figure 3-1.
Figure 3-1 Entering IP address in the Address Bar
A login screen prompts you for your user name and password, see Figure 3-2. When you
first login to the Gigabit Router, please use the default administrator account: Enter
admin
in both the
User name
and
Password
boxes (the default user name and password both
are
admin
), lastly click
OK
.
Figure 3-2 Login Screen
If your user name and password are correct, it will display the homepage, see Figure 3-3.
