UTT Technologies
Chapter 10 VPN
http://www.uttglobal.com
Page
20220220
click it to remove the check mark.
Edit an IPSec Entry:
If you want to modify a configured IPSec entry, click its
Edit
hyperlink, the related information will be displayed in the setup page. Then modify it,
and click the
Save
button.
Delete IPSec Entry(s):
If you want to delete one or more IPSec entries, select the
leftmost check boxes of them, and then click the
Delete
button.
9.5.5 Configuration Examples for IPSec – AutoKey
(IKE)
As mentioned earlier, in the
AutoKey (IKE)
mode, there are three connection types to
choose:
●
Bidirectional (Gateway-to-Gateway IPSec VPN):
Both IPSec endpoints have static
IP addresses. In this case, the local UTT VPN gateway can act as an initiator or
responder.
●
Answer-Only (Static-to-Dynamic IPSec VPN):
The local UTT VPN gateway has a
static IP address, while the remote endpoint (another UTT VPN gateway or
compatible VPN appliance) has a dynamic IP address. In this case, the local UTT
VPN gateway can only act as a responder, and the remote endpoint should provide
its identity information (such as an Email address, a domain name, etc) for
authentication.
●
Originate-Only (Dynamic-to-Static IPSec VPN):
The local UTT VPN gateway has a
dynamic IP address, while the remote endpoint (another UTT VPN gateway or
compatible VPN appliance) has a static IP address. In this case, the local UTT VPN
gateway can only act as an initiator, and it should provide its identity information
(such as an Email address, a domain name, etc) to the remote endpoint for
authentication.
9.5.5.1Bidirectional (Gateway-to-Gateway IPSec VPN)
●
If both IPSec endpoints have static IP addresses, you can choose
Bidirectional
as the connection type.
