UTT Technologies
Chapter 7 Advanced
http://www.uttglobal.com
Page 73
Cancel:
Click to revert to the last saved settings.
Back:
Click to go back to the
NAT Rule List
.
6.1.3.2.2 NAT Rule Settings - One2One
Figure 6-6 NAT Rule Settings - One2One
Name:
It specifies a unique name of the NAT rule.
NAT Type:
It specifies the type of the NAT rule. The available options are
EasyIP
and
One2One
. Here please select
One2One
.
Start External IP:
It specifies the start external IP address to which the start internal
IP address is mapped.
Start Internal IP
and
End Internal IP:
They specify the internal IP address range of
the NAT rule.
Bind to:
It specifies the interface to which the NAT rule is bound.
Save:
Click to save your changes.
Cancel:
Click to revert to the last saved settings.
Back:
Click to go back to the
NAT Rule List
.
Note
1. When creating a
One2One
NAT rule, you must set the
Start External IP
. The
number of the external IP addresses is the same as the number of internal IP
addresses, which is determined by the
Start Internal IP
and
End Internal IP
. For
example, if the
Start Internal IP
is 192.168.16.6,
End Internal IP
is 192.168.16.8,
and
Start External IP
is 200.200.200.116, then 192.168.16.6, 192.168.16.7, and
192.168.16.8 will be mapped to 200.200.200.116, 200.200.200.117, and
200.200.200.118 respectively.
