UTT Technologies
Chapter 10 VPN
http://www.uttglobal.com
Page
13213213
PPTP server, you will see that the tunnel’s
Status
changes from
Disconnected
to
Connected
, the
Up Time
timer starts, and the
Out Bytes
and
In Bytes
will go on
increasing as long as there is some network traffic being passed through the PPTP tunnel.
9.4 Configuration Example for PPTP Client
Figure 9-8 Network Topology - The Gigabit Router Acts as a PPTP client
In this example, a company’s head office is located in Washington, and its branch office is
located in New York. Now the company wants the head office and branch office to
securely communicate with each other over the Internet.
As shown in Figure 9-8, we will use PPTP to establish a VPN tunnel, deploy a HiPER
840G Gigabit Router acting as a PPTP client at the branch office, and another VPN
appliance (a UTT VPN gateway is recommended) acting as a PPTP server at the head
office. The IP addresses are as follows:
The HiPER 840G (PPTP Client) at the branch office:
LAN Subnet: 192.168.1.0/255.255.255.0
LAN Interface IP Address: 192.168.1.1/255.255.255.0
The VPN appliance (PPTP Server) at the head office:
LAN Subnet: 192.168.123.0/255.255.255.0
LAN Interface IP Address: 192.168.123.1/255.255.255.0
WAN Interface IP Address: 200.200.202.123/255.255.255.0
