Uponor AquaSAFE, Руководство по установке

Страница: 38 / 72

Note: To avoid over-expanding the piping, do not hold the piping
in the expanded position.
• Table 7-2 shows the recommended number of expansions.
Experience, technique, and weather conditions influence
the actual number of expansions. Fewer expansions may be
necessary under certain conditions. The correct number of
expansions is the amount necessary for the piping and the
shoulder of the fitting to fit snugly together.
• Ensure the ProPEX ring rests snugly against the fitting shoulder.
If there is more than
11
⁄
16 16
" (1 mm) between the ring and the
shoulder of the fitting, the connection must be replaced.
Square cut the piping 2" away from the fitting for
33
⁄
88
" to 1" pipe,
3" away for 1¼" to 2" pipe, and 5" away for 2½" and 3" pipe prior to
making the new connection.
• Brass ProPEX fittings can be disconnected and reused. EP
fittings must be discarded. Be sure to follow the recommended
minimum distance between ProPEX fittings shown in Table 7-1.
Pipe size
Milwaukee ProPEX expander tools
Pipe size
Milwaukee ProPEX
expander tools
Uponor ProPEX expander tools
M12 with standard
heads (2432)
M12 FUEL with RAPID
SEAL™ heads (2532)
M18 (2632)
M18 FORCE
LOGIC (2633)
Manual 100/150 201
3 3
⁄
8 8
" 6-7 6-10 5
33
⁄
8 8
" — 5 7 —
½" 7-8 5-8 9 ½" — 4 4 —
55
⁄
8 8
" 9-10 6-10 9
55
⁄
8 8
" — 9 9H —
¾" 11-12 7-12 10 ¾" — 14 7H —
1" 17-18 12-18 19 1" — — 7H —
1¼" — — 9 1¼" — — 8H —
1½" — — 10 1½" — — — —
2" — — — 2" 4 — — 5H
2½" — — — 2½" 5 — — —
3" — — — 3" 7 — — —
Table 7-2: Recommended number of expansions for
3 3
⁄
8 8
" to 3" piping at 73.4ºF (23ºC)
Note: “H” in the table refers to Uponor H-series expander heads.
32 l Uponor AquaSAFE System Installation Guide