Uponor AquaSAFE, Руководство по установке, Страница: 43 / 72

Figure 7-16: Ensure ring reaches
stop edge
Figure 7-15: Add ring
c. Rotate the six expansion
segments in the clockwise
direction. They will rotate
freely. They should not
rotate counter clockwise.
d. The expansion head collar
will fit flush against the tool.
Making a ProPEX connection
1. Square cut the pipe
perpendicular to the length,
and remove all excess
material or burrs.
2. Slide the ProPEX ring over
the end of the piping until it
reaches the stop edge.
3. The tool features auto
rotation so the head will
automatically rotate to
ensure the piping is
evenly expanded.
Note: To cancel the
expansion process quickly,
pull and release the trigger.
4. Press the trigger to initiate
the rotation of the head.
A green light will turn on
and the work light will blink.
Insert the pipe and ring and
release the trigger. When
the expansion head has
reached its maximum
diameter, it will retract.
Important! Do not force
the pipe and ring on the
head during any expansion.
5. After the tool has retracted,
the green indicator light
blinks three times. Press
the trigger and repeat the
expansion process.
Figure 7-14: Cut pipe
Figure 7-17: Begin expanding
uponor-usa.com | uponor.ca l 37