Uponor AquaSAFE, Руководство по установке

Страница: 30 / 72

4. Install concealed cover plates and/or escutcheons only after
the completion of ceiling construction. Leave protective caps
on all sprinklers until construction is complete.
5. After the ceiling is finished, install the concealed cover plates
by turning the cover clockwise until the flange is in contact
with the ceiling. The cover plate assembly typically provides
up to ½" adjustment. There will be a small gap between the
flange and the ceiling when properly installed. Escutcheons
are installed on the tension ring and are pressed into place
until the flange is tight against the ceiling. Escutcheons
typically allow for up to ½" adjustment.
Caution: To protect the sprinkler from damage due
to finishing work, cover the sprinkler with the plastic
cover provided with the sprinkler. Paint and gypsum
wallboard can damage a sprinkler if not properly protected.
After all finishing work is complete and ceiling or wallboard
is in place and painted, install the cover plates on the
concealed sprinklers or the escutcheon on the recessed
or horizontal sidewall sprinklers. The flat cover plate and
recessed escutcheon easily slide over the sprinkler using
a twisting motion.
24 l Uponor AquaSAFE System Installation Guide