Uponor AquaSAFE Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 72

Uponor AquaSAFE Скачать руководство пользователя страница 49

Important tips for a proper

33

/

88

" ProPEX connection

• The thicker

33

/

88

" ProPEX Ring shrinks over the fitting faster

than larger-sized rings.

• When the temperature is below 40°F (4.4°C), fewer

expansions are required.

Proper expander tool and head maintenance

• Use a lint-free cloth to apply a light coat of lubricant to the

cone prior to making any ProPEX connections.

• If used regularly, apply the lubricant daily to the cone of the

ProPEX expander tool. Failure to keep the tool lubricated may

result in improper connections.

Caution: Excessive lubrication may result in improper

connections. Only use a small amount of lubrication to

keep the tool working properly.

• Keep all other parts of the tool free from lubricant.

• Once a month, soak the heads in degreasing agent to remove

any grease from between the segments. Clean the cone using

a clean, dry cloth.

uponor-usa.com

|

uponor.ca

l 43

«
...
47
48
49
50
51
...
»

Содержание AquaSAFE









































































Отзывы:

Нет отзывов