65
The 1st line displays the latitude of the current
location.
The 2nd line displays the longitude of the
current location.
The 3rd line displays “OFF” (when a POI is not
selected) or the name of the selected POI.
The large arrow shows the direction to the
selected POI.
The left side of the 1st line displays the current
direction of travel.
The 2nd line displays the distance to the
selected POI.
The 3rd line displays the name of the selected
POI.
The right side of the 1st line displays:
•
The ETA (Estimated Time for Arrival) to the selected POI.
•
The present time.
•
The elevation of the current location.
•
The current speed.
While in GPS Display Mode
To Program the Current Location :
1.
Press and hold
GPS
for 2 seconds.
2.
To Select a POI turn the scroll control.
3.
To Toggle through the POI Display Modes press
then
6(DISP)
(each time).
Note: If no programmed location is displayed (‘OFF’ in the display), you will only be able to
toggle ‘Data Display’ and the (current) ‘Location Display’.
To Temporarily Lock Out an Alert press
L/O
or turn
.
The scanner automatically unlocks the
locked out location when it moves 4 miles or more from the alert point. Quickly pressing
L/O
press
twice permanently locks out the alert and it will not be activated again if you should go near that
alert point.
1.
To Toggle ‘Hold’ mode on a background
SCAN/SEARCH
press
HOLD
.
2.
To Return to Scan mode press
SCAN/SEARCH
.
3.
Press
GPS
again to view GPS Display Mode.
