16
7.
Slowly slide the scanner into the sleeve until it locks in place.
8.
To remove the unit, fully insert the removal keys into each slot on the left and right edges of
the front panel. Carefully slide the radio from the sleeve.
Note: If you plan to connect a GPS unit or external speaker at a later time, expect to remove
the unit for ease of making those connections.
Removing the Scanner from the DIN-E Sleeve
If you plan to connect other devices or wires to the radio, such as a GPS unit, at a later time, you
should plan to remove the scanner from the DIN-E sleeve. This is easily done using the provided
Removal Keys that come with the optional DIN-E sleeve.
Refer to the illustration that follows, showing the Removal Keys.
Fully insert both Removal Keys into the slots on the left and the right edges of the radio’s dress
panel. You cannot remove the radio with only one key. Press in fully,and do not twist the keys. The
radio will unlock from the sleeve making withdrawal from the sleeve possible. Store the keys in a
safe place for future use.
Mounting Using ISO Technique
Some vehicles can take advantage of another approach to mounting a radio in a vehicle, called
the ISO technique. However, this technique requires a very detailed and thorough knowledge of
the technique. Therefore, we strongly suggest that if you have any doubt about your experience
and abilities, please consult with a professional installer who is familiar with the ISO approach to
radio installation.
