42
The Ul2ma gate operator, much like a car, will provide many years of excellent service if a service schedule is
carried out at regular intervals. Follow these basic checks and do repairs in 2me to get the most out of your
operator.
WEEKLY
♦
Clear away any dirt, sand, stones or foliage collected on the gate rail.
♦
Clear away any branches, shrubs or grass that might interfere with the movement of the gate.
MONTHLY
♦
Check for damage or cracks to the motor lid. Although the operator lid is designed for outside condi2ons,
stones and severe hail may damage it. A cracked lid should be immediately replaced as water and dirt will dam-
age the operator.
♦
Check for insect and rep2le infesta2ons.
It is recommended that moth balls be placed inside the operator housing to discourage these infesta2ons
which can cause damage.
EVERY 6 MONTHS
♦
Check for oil leaks.
If the motor was overfilled during commissioning, it is possible that some oil might leak out within the
first few months aLer installa2on. If oil is visible during this period then clean it away and check again
within the a weeks to see if more oil is leaking.
♦
Test the gate pull and running forces (see pg. 8/9). Compare these values with those previously recorded. If the
values are significantly different from when originally installed it might be 2me to change the gate wheels.
♦
Check for baGery leaks, these can cause damage to the wiring.
♦
Check that the controller and other accessories are firmly in place and are not hanging loose.
♦
Check that the Marker Magnet on the gate is 2ght and not moving. (If it is moving, it must be 2ghtened and the
gate limits must be reprogrammed).
SERVICE SCHEDULE
Step 1: Download the latest version of the Tritek controller soLware from www.dace.co.za or it can be received
by WhatsApp or email.
Step 2: Save the soLware onto a USB Flash Drive or into the Downloads directory in a compa2ble Android
phone.
Method 1
(DACE preferred method):
Step 3: Remove all power from the controller.
Step 4: Plug the USB Flash Drive or Android phone into the USB port on the controller.
Step 5: Power up the controller by connec2ng the baGery and then the mains power supply.
Step 6: Once the controller has powered up, it will automa2cally start the upgrade process. Do not remove your
phone or Flash Drive un2l the controller tells you to remove it.
This method can only be used to upgrade to a newer soLware version.
The controller will only do an upgrade if the hardware is compa2ble with the new version
Method 2
:
Step 3: Navigate to the Update SoLware op2on on the USB Se?ngs menu.
Step 4: Plug the USB Flash Drive or Android phone into the USB port on the controller.
Step 5: Press the joys2ck up to accept Yes on the Update SoLware op2on
Step 6: The Controller will run the upgrade process. Do not remove the phone or Flash Drive un2l the controller
tells you to remove it.
This method can be used to upgrade to a newer soLware version or restore an older soLware version.
The controller will only make the soLware changes if the hardware is compa2ble with the new version.
UPGRADING CONTROLLER SOFTWARE
Con2nues……...
Содержание HT18/36
