Ultima HT18/36, Инструкция по установке и эксплуатации

Страница: 2 / 52

2
Page
Table of Contents
1.0
Foreword
—————————————————————————————–—————— 3
2.0
Abbreviaons
—————————————————————————————————-- 3
3.0
Introducon & Recommendaons
——————————————————–———————- 4
4.0
Specificaons
4.1 Ul2ma Operator ———————————————————————–——————- 5
4.2 Tritek Controller ———————————————————————–——————- 6
5.0
Operator & Site Basics
5.1 Operator Parts Iden2fica2on ————————————————–———————— 7
5.2 Site Layout ————————————————————————————————- 8
5.3 Gate Pull & Running Forces ————————————————————————- 8
5.4 Cable Recommenda2ons ——————————————————–———————-- 10
6.0
Installing the Operator
6.1 Anchoring the Founda2on Plate ———————————————–——————— 11
6.2 Removing the Lid ———————————————————————–——————— 11
6.3 Placing the Operator in Manual Override ———————————–———————- 11
6.4 Securing Operator to the Founda2on Plate ——————————–————————- 12
6.5 Moun2ng the Rack on the Gate ———————————————–—————— 12
6.6 Placing Oil in the Gearbox —————————————————–—————————- 14
6.7 Moun2ng the Marker Magnet ———————————————————————- 14
7.0
Controller Basics
7.1 Tritek Control Board Layout ————————————————————————— 15
7.2 Overview of Power Connec2ons & Fuses ——————————————————— 15
7.3 Overview of Low Power Inputs & Outputs ——————————————————— 16
8.0
Charging Supply Opons
——————————————————————————————— 17
9.0
Menu Navigaon Overview
—————————————————————————————— 18
10.0
Commissioning the Operator for the first me
————————————————————— 19
11.0
Wiring Diagrams
11.1 Two Sets of Safety Beams (Relay Output) ——————————————————— 20
11.2 External Radio Receiver & Loop Detector ——————————————————— 21
11.3 Closing Safety Beam (FET Output & Relay Output) ——————————————— 22
11.4 Opening Safety Beam (FET Output & Relay Output) ——————————————— 23
11.5 Connec2ng Common External Devices ————————————————————— 24
11.6 Connec2on for Relay Module ————————————————————————— 25
11.7 Electric & Magne2c Locks ——————————————————————————— 26
11.8 Connec2ng Various Devices to Pulse & Alarm Outputs —————————————- 27
11.9 Two Synchronised Operators connected to One Set of Safety Beams ———————- 28
12.0
Control Board Funcons
12.1 Beam Se?ngs ——————————————————————————————— 29
12.2 Auto Close Setup ——————————————————————————————— 30
12.3 Remote Se?ngs ——————————————————————————————— 30
12.4 Pedestrian Entry ——————————————————————————————— 32
12.5 Light Se?ngs ——————————————————————————————— 33
12.6 Security Se?ngs ——————————————————————————————— 33
12.7 Lock Se?ngs ————————————————————————————————— 34
12.8 Opera2ng Modes ——————————————————————————————— 35
12.9 GSM Se?ngs ——————————————————————————————— 35
12.10 Energy Saving ——————————————————————————————— 35
12.11 USB Se?ngs ————————————————————————————————— 36
12.12 HID Se?ngs ————————————————————————————————— 37
12.13 Diagnos2cs ————————————————————————————————— 37
12.14 General Se?ngs ——————————————————————————————— 37
12.15 Time Manager ——————————————————————————————— 37
12.16 Gate Setup ————————————————————————————————— 39
13.0
Addional Features
13.1 Holiday Lockout ———————-——————————————————————— 41
13.2 Ground Loop ———————————————————————————————— 41
14.0
Upgrading Controller So(ware
——————————————————————————- 42
15.0
Service Schedule
————————————————————————————————- 42
16.0
Noficaon Messages
——————————————————————————————- 43
17.0
Warning Messages
————————————————————————————————- 44
18.0
Glossary
————————————————————————————————————- 46
19.0
Technical Specificaons
——————————————————————————————— 48
20.0
Terms & Condions
————————————————————————————————— 49
21.0
Warranty & Disclaimer
——————————————————————————————— 52