Ulead MEDIASTUDIO PRO 7, Руководство пользователя

Страница: 97 / 436

VIDEO CAPTURE: CHAPTER TWO 97
3. Run Video Capture and click Setup: Switch Capture Plug-in.
4. Select Ulead DSW MPEG Capture Plug-in.
5. To begin capturing, click Record on the Control Bar, or click Capture:
Video when working in Capture mode.
6. Specify the Capture method and click Properties to define the video
and audio capture settings of the MPEG file. Click OK to return to the
Capture Video dialog box.
7. Enter a file name for the video. Click Browse to locate the target direc-
tory.
8. Click OK to start capturing. If you want to start capturing immediately
after pressing Record, clear Display capture options before capturing
in Preferences dialog box.
9. To stop capturing, press [
ESC
]. If you have specified the length of
capturing under Capture Method, MediaStudio Pro automatically stops
the capturing process for you.
Direct WMV capturing
Now you can capture directly from an analog source or DV camcorder
straight to Windows Media Video (WMV). WMV is an extensible file
format that handles synchronized multimedia data and supports “live
content” transmission over a wide array of networks. Selecting this will
automatically convert your video to a WMV file. Note that when you click
Setup: Video Capture Property Settings, you will see Select (available
only when the WMV plug-in is selected) instead of Advanced at the bottom
of the dialog box.
To directly capture to WMV format:
1. Connect your DV camcorder to your IEEE-1394 interface card.
Note: When acquiring video from an analog source, be sure that the analog
capture card you are using supports RGB or YUV capture
2. Turn on your camcorder and set it to Play mode (or VTR/VCR mode).