- 3 -
Preset
output
Output method
NPN open collector output.(×２)
Maximum rating
DC30V 50mA(max.)
Comparative method The upper limit, lower (immediately) and lower (delay).
Output mode
Compared with the indication value by preset value.
Comparison, hold and 1 shot.
Judgment
prohibition time
The presetting output function is disabled for the specified time
interval following power ON or reset. Up to 1
–
60 sec, 9 stages.
〔Does not work with lower(delay) mode.〕
Others
Error display
function
When abnormality occurred to a sensor power supply, "Err01" and a measured
value are indicated alternately.
Data backup
Each mode set value and totalized value are saved on FRAM.
(The memory writable number of times is within 100,000 times, retention about
10 years.)
Mode protect
Prohibit mode setting change.
Warm up time
After turning on the power, more than 30 minutes.
Power supply
DC24V(
±
10%)
Power consumption 3Ｗ max
Temperature/humidity
conditions
-10 - 50℃ 30 - 80％RH (No-condensation)
Dimensions and weight W48
×
H24
×
D63mm (An installation adapter isn't included.)Approx ４0g
Color
Black
Flame retardant grade UL94 V-0
Material of the case Polycarbonate
Safety class
IP66 (front)
Isolation
Power supply and input/output are not isolated
EMC
EN61326-1
EN55011(Group1 ClassA), EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6
