- 31 -
【 Digit selection 】
It chooses "the right 4 digits" or"the left 4 digits", and setting.
Ａ Ｂ Ｃ Ｄ Ｅ
Right 4 digits
Left 4 digits
！ < Caution >
※An analog output is outputting calculation to the indication
value shown to 7 segment LED. Therefore the resolution
sometimes falls from 13000 by setting of mode No.C,d.
When the analog output maximum output indication value
set "more than 1300"and "the left 4 digits", it will be 13000
resolutions, basically.
< Addition about the analog output resolution >
The setting of analog output sets each 4 digits of left and right.
But that's compared by at most 5 digits (left 4digits) by calculation.
The analog output is outputting to the indication value into which
the reach from a least significant digit to the highest rank
figure was divided by 13000 resolutions in relation to mode d.
(the indication value to the 1bit)
〔Ex.〕The settings in a case where the analog output is
synchronized with the rate reading, with a maximum output
when the reading is 10, would be as follows.
< Condition >
Mode No.C : Digit selection → Left 4 digits
Mode No.d : Setting of maximum output indication → 0001
(Result)
Digital/analog converter is 0-13000 bits to indication value 0-10.
Therefore analog is output every 1300 bits to a change in
the indication value "1".
Therefore the resolution is 10 resolutions.
