background image

Precautions

 
  Please read this Operation Manual including the following precautions carefully to ensure 
  s
 
   

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

4. Do not use the product where t
5. In the event of a product failure or abnormality, build an emergency stop or

 

1. Use the power supply 
2. Do not use in the following environments.

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

4. Check regular
5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

6

7. Keep the product and wiring away from noise sources.
8. 

9

10

11

Product Description

 

 

recautions

Please read this Operation Manual including the following precautions carefully to ensure 
safe use of your meter.

   

Warning

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

fire. 

4. Do not use the product where t
5. In the event of a product failure or abnormality, build an emergency stop or

fail-safe system to ensure safety.

Caution

1. Use the power supply 
2. Do not use in the following environments.

・  A place exposed to metal powder, dust, water, chemicals, oil, etc.
・  A place with corrosive gas
・  Outdoor use and places exposed to direct sunlight
・  Locations wher
・  Temperature and humidity outside the rated range
・  Locations subject to vibration or impact

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

the product. There is a risk of failure or fire.

4. Check regular
5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

  immediately turn off the power and stop using it.

6. Install the switch or circuit

in an emergency.
Please indicate that it is a device shut

7. Keep the product and wiring away from noise sources.
8. If there is a possibility of invasion the lightning surges, 

install countermeasure parts

9. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

10. When cleaning, wipe with a dry cloth

such as b

1. If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.
 
 

Product Description

 

With the panel mounted, the front has been protected by grade IP66. dust and
water resistant products.

recautions     

Please read this Operation Manual including the following precautions carefully to ensure 

use of your meter.

Warning: 

Content

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

4. Do not use the product where t
5. In the event of a product failure or abnormality, build an emergency stop or

safe system to ensure safety.

Caution: 

Contents that may cause minor injury or property damage.

1. Use the power supply 
2. Do not use in the following environments.

A place exposed to metal powder, dust, water, chemicals, oil, etc.
A place with corrosive gas
Outdoor use and places exposed to direct sunlight
Locations wher
Temperature and humidity outside the rated range
Locations subject to vibration or impact

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

the product. There is a risk of failure or fire.

4. Check regularly for any malfunctions or abnormalities.
5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

immediately turn off the power and stop using it.
Install the switch or circuit
in an emergency. 
Please indicate that it is a device shut

7. Keep the product and wiring away from noise sources.

If there is a possibility of invasion the lightning surges, 

install countermeasure parts

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

cleaning, wipe with a dry cloth

such as benzine, thinner or alcohol.
If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

Product Description

With the panel mounted, the front has been protected by grade IP66. dust and
water resistant products.

                   

Please read this Operation Manual including the following precautions carefully to ensure 

use of your meter. 

Contents that may cause death or serious injury.

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

4. Do not use the product where t
5. In the event of a product failure or abnormality, build an emergency stop or

safe system to ensure safety.

Contents that may cause minor injury or property damage.

1. Use the power supply voltage and load within the specified range.
2. Do not use in the following environments.

A place exposed to metal powder, dust, water, chemicals, oil, etc.
A place with corrosive gas
Outdoor use and places exposed to direct sunlight
Locations where condensation occurs
Temperature and humidity outside the rated range
Locations subject to vibration or impact

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

the product. There is a risk of failure or fire.

ly for any malfunctions or abnormalities.

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

immediately turn off the power and stop using it.
Install the switch or circuit breaker in a position where it can be 

 

Please indicate that it is a device shut

7. Keep the product and wiring away from noise sources.

If there is a possibility of invasion the lightning surges, 

install countermeasure parts

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

cleaning, wipe with a dry cloth

enzine, thinner or alcohol.

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

Product Description                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and
water resistant products.

               

Please read this Operation Manual including the following precautions carefully to ensure 

that may cause death or serious injury.

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

4. Do not use the product where there is flammable gas or ignited material.
5. In the event of a product failure or abnormality, build an emergency stop or

safe system to ensure safety. 

Contents that may cause minor injury or property damage.

voltage and load within the specified range.

2. Do not use in the following environments.

A place exposed to metal powder, dust, water, chemicals, oil, etc.
A place with corrosive gas 
Outdoor use and places exposed to direct sunlight

e condensation occurs

Temperature and humidity outside the rated range
Locations subject to vibration or impact

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

the product. There is a risk of failure or fire.

ly for any malfunctions or abnormalities.

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

immediately turn off the power and stop using it.

breaker in a position where it can be 

Please indicate that it is a device shut

7. Keep the product and wiring away from noise sources.

If there is a possibility of invasion the lightning surges, 

install countermeasure parts such as a 

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

cleaning, wipe with a dry cloth, 

enzine, thinner or alcohol. 

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and

                                             

Please read this Operation Manual including the following precautions carefully to ensure 

that may cause death or serious injury.

1. Perform wiring with the power off. There is a risk of
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

here is flammable gas or ignited material.

5. In the event of a product failure or abnormality, build an emergency stop or

Contents that may cause minor injury or property damage.

voltage and load within the specified range.

2. Do not use in the following environments. 

A place exposed to metal powder, dust, water, chemicals, oil, etc.

Outdoor use and places exposed to direct sunlight

e condensation occurs 

Temperature and humidity outside the rated range
Locations subject to vibration or impact 

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

the product. There is a risk of failure or fire. 

ly for any malfunctions or abnormalities.

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

immediately turn off the power and stop using it.

breaker in a position where it can be 

Please indicate that it is a device shut-off device.

7. Keep the product and wiring away from noise sources.

If there is a possibility of invasion the lightning surges, 

such as a lightning arrestor in outside.

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

 do not use organic solvents

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and

                       

Please read this Operation Manual including the following precautions carefully to ensure 

that may cause death or serious injury.

1. Perform wiring with the power off. There is a risk of electric shock or fire.
2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

here is flammable gas or ignited material.

5. In the event of a product failure or abnormality, build an emergency stop or

Contents that may cause minor injury or property damage.

voltage and load within the specified range.

A place exposed to metal powder, dust, water, chemicals, oil, etc.

Outdoor use and places exposed to direct sunlight 

Temperature and humidity outside the rated range 

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

ly for any malfunctions or abnormalities. 

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

immediately turn off the power and stop using it. 

breaker in a position where it can be 

off device. 

7. Keep the product and wiring away from noise sources. 

If there is a possibility of invasion the lightning surges,   

lightning arrestor in outside.

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements.

o not use organic solvents

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and

                       

Please read this Operation Manual including the following precautions carefully to ensure 

that may cause death or serious injury. 

electric shock or fire.

2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

here is flammable gas or ignited material.

5. In the event of a product failure or abnormality, build an emergency stop or

Contents that may cause minor injury or property damage.

voltage and load within the specified range.

A place exposed to metal powder, dust, water, chemicals, oil, etc.

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter 

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

breaker in a position where it can be operated immediately

 

lightning arrestor in outside.

. It can be used almost at the same time as the power is turned on, but itrequires

30 minutes of power to satisfy all performance requirements. 

o not use organic solvents 

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically.

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and

                           

Please read this Operation Manual including the following precautions carefully to ensure 

electric shock or fire. 

2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

here is flammable gas or ignited material. 

5. In the event of a product failure or abnormality, build an emergency stop or 

Contents that may cause minor injury or property damage. 

voltage and load within the specified range. 

A place exposed to metal powder, dust, water, chemicals, oil, etc. 

3. Do not allow metal powder, dust, water, chemicals, oil, etc., to enter   

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc.,

operated immediately

lightning arrestor in outside. 

. It can be used almost at the same time as the power is turned on, but itrequires

 

If the waterproof packing is used in a deteriorated state, the waterproof and

dustproof function will be impaired. Inspect and trade it periodically. 

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and

         

Please read this Operation Manual including the following precautions carefully to ensure 

2. Do not touch the terminals while power is being supplied. There is a risk of electric shock.
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or 

 

5. If the product is malfunctioning or has fire, smoke, overheating, abnormal noise, etc., 

operated immediately 

. It can be used almost at the same time as the power is turned on, but itrequires   

If the waterproof packing is used in a deteriorated state, the waterproof and 

                                                                                                         

With the panel mounted, the front has been protected by grade IP66. dust and 

     

Please read this Operation Manual including the following precautions carefully to ensure   

2. Do not touch the terminals while power is being supplied. There is a risk of electric shock. 
3. Do not disassemble or touch the inside of the product. There is a risk of electric shock or   

 

 

                                                                                                         

 

Содержание SP2441 Series













































Отзывы: