- 21 -
【 Display moving average 】
If the moving average count is set to 3 at "Mode No.4", captures 3 times
of instantaneous measurement data capture Calculates, captures
the next instantaneous measurement data, discharges the oldest
instantaneous measurement data, and displays the calculation.
■Example (Moving average count : 3)
Rate meter
A display Ｃ display
Ｂ display
1.0 2.0 3.0 4.0 5.0 6.0
Ａdisplay 2.0 = (1.0+2.0+3.0)÷3
Ｂdisplay 3.0 = (2.0+3.0+4.0)÷3
Ｃdisplay 4.0 = (3.0+4.0+5.0)÷3
< Caution >
* Please note that the display response is delayed until it stabilizes
because the display sampling time is taken in the set number of times.
* If the data is less than the moving average count, the average
value of the currently held data is displayed.
Mode No. Ratemeter : Setting the auto-zero time
５
Ａ Ｂ Ｃ Ｄ Ｅ
５． ０ ２．０
Auto-zero time
00.1-99.9 seconds (Fixed decimal place)
〔00.0 disables the function.〕
【 Auto-zero time 】
If no input signal comes in within the set time, this function returns
the reading indication value to "0".
！ < Caution >
* Please note that when "00.0" is specified, this function is
disabled, and the reading remains still even after the input is
shut off.
