- 16 -
10. Mode setting
≪1. Operating method (the mode setting)≫
When doing mode setting, please operate as follows.
Operation key
Indication
Procedure
＋
Ａ Ｂ Ｃ Ｄ Ｅ
１．
１
０ ０ ０
While pushing down Mode Key, press
Shift Key for 2 sec, or more.
"1" appears in display A, the value setting
for mode No.1 is shown.
Ａ Ｂ Ｃ Ｄ Ｅ
１．１→
０
→０→０
└－－←－－┘
A figure of flash indication is shifted.
Each time the key is pressed, a flash figure
is shifted to the right.
Ａ Ｂ Ｃ Ｄ Ｅ
１．１
１
０ ０
↑
０→９
Changes the value of the flashing digit.
Each time Display Key is pressed, the number
goes up by one. (0→1→……→9→0→……)
* In situation, doesn't indicate by a setting
figure, up to nine.
Ａ Ｂ Ｃ Ｄ Ｅ
２
．３ ０ １ １
↑
1 - d
Changes the value of the mode No.
Each time Mode Key is pressed, the number goes
up by one. (1→2→……→d→1→2……)
Set the desired value with the Shift Key and
Display Key.
Ａ Ｂ Ｃ Ｄ Ｅ
measured value
After adjusting the setting, use Reset Key
to register it.
The display returns to the readings
following registration.
！ < Caution >
* Please make the mode protect function "L-off" at the mode setting.
If it's a condition of "L-on", it can't be changed.
About the contents of the mode protect function, please refer to,
"11. The mode protect function".
MODE
MODE
DISP
RST
▲
▲
