Tuttnauer LabSci 11-V, Руководство по эксплуатации и обслуживанию, Страница: 92 / 97

Page 91
Message /
Symbol /
Problem
Failure Description Corrective Action
damaged.
Low Temp
This message is displayed if
the temperature drops for
more than 1 second below
the sterilization temperature
during sterilization cycle.
Perform a new cycle.
High Temp
This message is displayed if
the temperature raises 7°F
(4°C) above sterilization
temperature during the
sterilization stage for 2
seconds during sterilization
cycle.
Perform a new cycle.
High Temp.
(Ending)
This message is displayed if
the system cannot reach the
required temperature, in the
chamber, within 10 minutes.
Perform a new cycle.
High Temp.
(Cooling)
This message is displayed if
the system cannot reach the
required temperature, in the
cooling stage, within preset
time.
Check and fix the city
(tap) water supply.
Heat Time
Error
This message is displayed if
the system cannot reach the
required temperature, in the
chamber, within the preset
time.
Verify that the autoclave
is not overloaded.
Heat Time
Error (Keep)
This message is displayed if
the system cannot reach the
required temperature, in the
chamber, during the optional
"Keep Heat" stage, within the
preset time.
Verify that the autoclave
is not overloaded.
Low
Pressure
This message is displayed if
Chamber Pressure drops
below the sterilization
pressure (134°C = 304 kPa,
121°C = 205 kPa) for 2
seconds during the
sterilization stage.
Perform a new cycle.
Low
Pressure
(Cooling)
This message is displayed if
the pressure in chamber does
not reach the preset pressure
before initiating the cooling
Check and fix the
compressed air supply.