Tuttnauer LabSci 11-V, Руководство по эксплуатации и обслуживанию

Страница: 5 / 97

Page 4
1. General Information
1.1 Introduction
Attention!
This device is not a medical device and not intended for
medical use.
LABSCI 11LV is a vertical sterilizer designed especially for sterilization
of instruments, liquids and other materials in hospital laboratories,
laboratories & research institutes, food laboratories and pharmaceutical
facilities.
The sterilizer is fully automatic with a choice of ten programs (including
two custom programs), eliminating any need for operator intervention
during a cycle. The custom programs are programs that may be
changed by an authorized technician. A computerized control unit
enables precise control and monitoring of physical parameters and
clear documentation of the sterilization cycles.
The autoclave is equipped with a safety valve, which blows off at 280
kPa (40 psi) (max. working pressure). The safety valve is located on
the rear of the autoclave. The control system provides adequate
protection, to ensure the safety of personnel and reliable operation with
a minimum of down time.
Printer is an optional addition to the autoclave. The printer prints the
preset and actual parameters of the cycle (temperature, time, and
pressure/vacuum).
The autoclave is equipped with an analog pressure gauge designed for
reference only. In case that there is any problem with electricity supply
during a sterilization cycle the pressure gauge will be used to verify that
there is pressure in the chamber.
The temperature and pressure are controlled through sensors placed
inside and outside the media container or bottles.
This manual is intended to give the user a general understanding of
how the autoclave works and indicates best ways to operate and
maintain it to obtain optimum results and a trouble-free operation.